Bed-in-coating
 |
Rapid bed-in coating
Upon fitting a new pad, the surface contact is intially quite poor, discs and pad surfaces never being completely smooth. It usually takes several hundred km for the brake pad to bed in, when the surfaces of pad and disc will match. The bed-in coating on JURATEK pads ensures maximum surface contact almost immediately, avoiding the usual time to bed in the pad. |
|
ECE R90 approved friction material
All heavy commercial vehicle brake pads are approved to Regulation 90 (ECE R90) while all light commercial vehicle references are approved to ECE R90 where required.
|
|
